|
|
Description |
|
---|---|---|---|
comp-lim-head-part-revised |
N/A | N/A This DejondĀ® part was designed with a "compression limiter-like" collar on the flat head, used to act as a spacer between two assembled components |
comp-lim-head-part-installed-resized |
picture-2-revised |
N/A | N/A This part was developed to attach a molded plastic cover to a base unit. If the rivet nut has an outside thread to accept a nut, the plastic cover could be altered and the external thread of the rivet nut could be used for the attachment point. |
picture-2-rendered-resized |
SH-11-013-revised |
N/A | N/A Special small grip part designed for materials thinner than 0.030 inches |
SH-11-013-inst-rendered-resized |
SH-18-035-resized |
N/A | N/A A replacement for a more expensive, machined component that would periodically spin-out. The customer required a low-profile insert with high spin-out resistance. Sherex developed this part has a half-hex body to increase spin performance, 0.145" max installed length, and higher strength threads to withstand installation forces. |
SH-18-035-installed-resized |
SH-13-043-resized |
N/A | N/A Sherex shouldered rivet nut was developed for attachments in plastics. The shoulder design provides a positive metal to metal installation redirecting the load of the joint through the rivet nut shoulder. This minimizes the plastic from creeping during assembly and maintains joint clamp load |
SH-13-043-inst-rendered-resized |
CPB2-610-7-1WT-resized |
N/A | N/A M6 prebulbed slotted body design incorporated under head wedgets to increase spin out resistance in soft plastic |
CPB2-610-7-1WT-inst-ren-resized |
CPB2-3118-280-TRH-resized |
N/A | N/A 5/16-18 prebulbed slotted body style with a trimmed head. This head feature allowed installation in the field by the consumer to assembler when used with a special low cost installation tool. Feature also allows head to sit flush within a slot to prevent spin out. |
CPB2-3118-280TRH-inst-ren-resized |
984529-resized |
N/A | N/A Closed end design with o-ring and o-ring recess under head provides the ultimate sealing solution for attachment points in applications with chemicals and other fluids that breakdown other sealing compounds. |
984529-inst-rendered-MP-Resized |
CAH2-610-4-2H3MM-resized |
N/A | N/A Designed with an extra large head to act like a spacer. |
CAH2-610-4-2H3MM-inst-rend-resized |
SH-10-018-revised |
N/A | N/A Sherex developed this part to add increased spin-out resistance in soft materials. Special knurl design provides increased engagement with the base material. Small flange provided near flush installation. |
SH-10-018-inst-rendered-resized |
T148409-resized |
N/A | N/A Sherex developed a high strength rivet nut that is compatible with class 10.9 bolts. This design incorporates a full hex body for increased spin-out resistance. It also ensures the bolt is the failure mode, which is a best practice when working with structural applications. |
T148409-inst-rendered-resized |
SH-13-031-resized |
N/A | N/A Special head and wedge design to meet spin-out requirements in an application. |
SH-13-031-rendered-resized |
|
N/A | N/A Examples of Sherex Custom Engineered Specialty Products |
|