- All Categories
-
Fasteners for Thin Sheet Attachments
-
Blind Rivet Nuts
-
Round Body Rivet Nuts
-
Optisert Series
- Optisert -- Open End (Metric) | Steel (302 Items)
- Optisert -- Open End (Inches) | Steel (144 Items)
- Optisert -- Closed End Sealed (Metric) | Steel (302 Items)
- Optisert -- Closed End Sealed (Inches) | Steel (144 Items)
-
CAL Series
- CAL Series - Steel (Inches) | Large Flange Knurled Body Thin Wall Series (268 Items)
- CAL Series - Steel (Metric) (368 Items)
- CAL Series - Aluminum (Inches) (132 Items)
- CAL Series - Aluminum (Metric) (368 Items)
- CAL Series - Stainless Steel (Inches) (10 Items)
- CAL Series - Stainless Steel (Metric) (6 Items)
-
CAK Series
- CAK Series - Steel (Inches) | Small Flange Knurled Body Thin Wall Rivet Nut (2256 Items)
- CAK Series - Steel (Metric) (293 Items)
- CAK Series - Aluminum (Inches) (2256 Items)
- CAK Series - Aluminum (Metric) (293 Items)
- CAK Series - Stainless Steel (Metric) (10 Items)
-
CA Series
- CA Series - Steel (Inches) | Heavy Duty Rivet Nut Flat Head, Large Flange, Smooth Shank (193 Items)
- CA Series - Aluminum (Inches) (193 Items)
- CA Series - Stainless Steel (Inches) (193 Items)
-
CAO Series
- CAO Series - Steel (Inches) | Small Flange, Smooth Body, Thin Wall Rivet Nut (134 Items)
- CAO Series - Steel (Metric) (162 Items)
- CAO Series - Aluminum (Inch) (134 Items)
- CAO Series - Aluminum (Metric) (162 Items)
-
CFW/CAW Series
- CFW/CAW Series - Steel (Inches) | Cadmium Free Diamond Knurled Body 360° Swaging Rivet Nut (7 Items)
- CFW/CAW Series - Steel (Metric) (5 Items)
- CFW/CAW Series - Aluminum (Inches) (7 Items)
- CFW/CAW Series - Aluminum (Metric) (5 Items)
- CFW Series - Stainless Steel (Inches) (7 Items)
- CFW/CAW Series - Stainless Steel (Metric) (5 Items)
-
CFT/CAT Series
- CFT/CAT Series - Steel (Inches) | Cadmium Free Small Flange 360° Swaging Rivet Nut (9 Items)
- CFT/CAT Series - Steel (Metric) (7 Items)
- CFT/CAT Series - Aluminum (Inches) (9 Items)
- CFT/CAT Series - Aluminum (Metric) (7 Items)
- CFT Series - Stainless Steel (Inches) (9 Items)
- CFT Series - Stainless Steel (Metric) (7 Items)
-
CPB Series Rivet Nuts
- CPB Series - Steel (Inches) (162 Items)
- CPB Series - Steel (Metric) (325 Items)
-
CPN Series Rivet Nuts
- CPN Series - Steel (Inches) | Straight Shank Slotted Body Rivet Nut (162 Items)
- CPN Series - Steel (Metric) (325 Items)
-
UPO Tubtara®
- UPO Series - Steel (18 Items)
- UPO Series - Aluminum (15 Items)
- UPO Series - 304 Stainless Steel (11 Items)
- UPO Series - 316 Stainless Steel (3 Items)
-
UFO Tubtara®
- UFO Series - Steel (13 Items)
- UFO Series - Aluminum (11 Items)
- UFO Series - 304 Stainless Steel (6 Items)
-
UKO Tubtara®
- UKO Series - Steel (8 Items)
- UKO Series - Aluminum (4 Items)
- UKO Series - 304 Stainless Steel (5 Items)
- UKO Series - 316 Stainless Steel (3 Items)
- UKO Series (Inches) - 304 Stainless Steel (3 Items)
-
UPO RS Tubtara®
- UPO RS Series - Steel (10 Items)
-
UFO RS Tubtara®
- UFO RS Series - Steel (10 Items)
-
CLM
- CLM Series - Steel (5 Items)
- CLM Series - Aluminum (5 Items)
-
CKM
- CKM Series - Steel (5 Items)
- CKM Series - Aluminum (5 Items)
-
Optisert Series
-
Hex Body Rivet Nuts
-
FHL Series
- FHL Metric Series (271 Items)
- FHL Inch Series (1042 Items)
-
FHK Series
- FHK Metric Series (307 Items)
- FHK Inch Series (1181 Items)
- LRGH Series (4 Items)
-
CAH Series
- CAH Series - Steel (Inches) (2257 Items)
- CAH Series - Aluminum (Inches) (2256 Items)
- CAH Series - Steel (Metric) (293 Items)
- CAH Series - Aluminum (Metric) (293 Items)
-
HUKO Series
- HUKO Series (Inches) (3 Items)
- HUKO Series (Metric) (8 Items)
- HUPO Series (10 Items)
-
HUKO Stainless Series
- HUKO Series - 304 Stainless Steel (6 Items)
- HUKO Series - 316 Stainless Steel (3 Items)
-
HUPO Stainless Series
- HUPO Series - 304 Stainless Steel (4 Items)
- HUPO Series - 316 Stainless Steel (3 Items)
-
CFH Series
- CFH Series - Steel (Inches) (15 Items)
- CFH Series - Steel (Metric) (12 Items)
- CFHD Series (6 Items)
-
FHL Series
-
Large Size Rivet Nuts
- Round Body Large Size Rivet Nuts (5 Items)
- Full Hex Body Large Size Rivet Nuts (4 Items)
-
RIV-FLOAT® Rivet Nuts
- RIV-FLOAT® Rivet Nuts (251 Items)
- RIV-FLOAT®-Short Series (6 Items)
- Rivet Nut Studs
-
NAS/MS Rivet Nuts
- NAS 1329 Flat Head Style (46 Items)
- NAS 1330 Countersunk Head Style (46 Items)
- Specialty Fastener Solutions (13 Items)
-
Round Body Rivet Nuts
- Fasteners for Plastics & Composites
-
Clinch Nuts
- ACN Series High Strength Clinch Nut Series (6 Items)
- ARN Series Universal Riveting Nut Series (5 Items)
- ASN Series Serrated Style Clinching Nut Series (4 Items)
- Load Bearing Nut Plates and Stud Plates
- Compression Limiters
-
Blind Rivet Nuts
-
Vibrational Loosening Prevention - Wedge Locking Technology
- TEC Series® Wedge Locking Washers
-
Disc-Lock® Wedge Locking Washers
- Disc-Lock® Carbon Steel Washers (17 Items)
- Disc-Lock® Stainless Steel Washers (10 Items)
-
Disc-Lock® Wedge Locking Nuts
- Disc-Lock® Two-Piece Wedge Locking Nuts (18 Items)
- Disc-Lock® Safety Wheel Nut
- Disc-Lock™ Heavy Hex Nuts (6 Items)
- Disc-Lock® Bolts
-
Fastener Installation Systems
-
Rivet Nut Hand Tools
- Rivet Nut Hand Tool (16 Items)
- DLHT Double Lever Hand Tool (12 Items)
- DRHT Double Ratchet Hand Tool (15 Items)
- LHF 202 Hand Tool
-
Pneumatic Tools (Spin-Spin)
- SSG 800 Pistol Style Series (20 Items)
- SSG 900 Inline Style Series (17 Items)
- SSG 910 Inline Right Angle Style Series (17 Items)
-
Hydro-Pneumatic Tools
- MS 100 Rivet Nut Installation Tool 5/16-18-1/2-13 (M8-M14) (12 Items)
-
FLEX-5 Series Rivet Nut Installation Tool 4-40 to 3/8-24 (M3 to M10)
- FLEX-5S Pull to Stroke Installation Tool (17 Items)
- FLEX-5P Pull to Pressure Installation Tool (17 Items)
- FLEX-18 Rivet Nut Installation Tool 5/16-18 - 3/4-10 (M8-M20) (12 Items)
- Automation
-
Rivet Nut Hand Tools
-
Fasteners for Thin Sheet Attachments
CPN Series - Steel (Inches) | Straight Shank Slotted Body Rivet Nut
CPN Series Rivet Nuts
Sherex's straight shank, slotted body rivet nuts have increased grip ranges over other Sherex rivet nuts, and are best used in softer materials and thing material like plastic, aluminum, and composite. The difference between the prebulbed slotted body CPB Series rivet nut and the straight shank CPN Series is it can fit into a smaller hole than the prebulbed CPB Series, as the bulb of the CPB Series has a wider body. The CPN is also recommended to be installed with spin-pull tooling, while prebulbed can be used with spin-spin tooling. Both slotted body rivet nuts offer a wide grip range with its cross-nut fastening solution, and both provide superior pull-out resistance against other fasteners.
Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details.
Can be installed with spin-pull tooling. See Sherex's spin-pull tooling offerings for more details.
Finish: Zinc Plated-Yellow Trivalent Chromate SFS-01-001, SC2. **Special finish or material available upon request!**
Sherex rivet nuts are compatible with the following hardware:GRADE 2, GRADE 5, CLASS 8.8, and CLASS 9.8
Please contact Sherex when using other grade fasteners.
Items may not always be in stock. Contact Sherex for current availability.
Straight Shank Slotted Body Rivet Nut Series
Sherex's straight shank, slotted body rivet nuts have increased grip ranges over other Sherex rivet nuts, and are best used in softer materials and thing material like plastic, aluminum, and composite. The difference between the prebulbed slotted body CPB Series rivet nut and the straight shank CPN Series is it can fit into a smaller hole than the prebulbed CPB Series, as the bulb of the CPB Series has a wider body. The CPN is also recommended to be installed with spin-pull tooling, while prebulbed can be used with spin-spin tooling. Both slotted body rivet nuts offer a wide grip range with its cross-nut fastening solution, and both provide superior pull-out resistance against other fasteners.
Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details.
Can be installed with spin-pull tooling. See Sherex's spin-pull tooling offerings for more details.
Finish: Zinc Plated-Yellow Trivalent Chromate SFS-01-001, SC2. **Special finish or material available upon request!**
Sherex rivet nuts are compatible with the following hardware:GRADE 2, GRADE 5, CLASS 8.8, and CLASS 9.8
Please contact Sherex when using other grade fasteners.
Items may not always be in stock. Contact Sherex for current availability.
Item # |
Thread Size |
Grip Range
|
L ±.015
|
D (Max.)
|
IL (Ref.)
|
Hole Size
|
3D CAD |
---|---|---|---|---|---|---|---|
CPN2-2520-500(mt.45) CPN2-2520-500(mt.45)/Asset/CPN.jpg | Thread Size N/A 1/4-20 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.234 |
D (Max.) (inches) N/A .346 |
IL (Ref.) (inch) N/A .505 |
Hole Size +.006/-.000 (inches) N/A .347 |
3D CAD N/A |
CPN2-3118-500(mt.45) CPN2-3118-500(mt.45)/Asset/CPN.jpg | Thread Size N/A 5/16-18 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.375 |
D (Max.) (inches) N/A .437 |
IL (Ref.) (inch) N/A .570 |
Hole Size +.006/-.000 (inches) N/A .438 |
3D CAD N/A |
CPN2-2520-500(mt.46) CPN2-2520-500(mt.46)/Asset/CPN.jpg | Thread Size N/A 1/4-20 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.234 |
D (Max.) (inches) N/A .346 |
IL (Ref.) (inch) N/A .505 |
Hole Size +.006/-.000 (inches) N/A .347 |
3D CAD N/A |
CPN2-3118-500(mt.46) CPN2-3118-500(mt.46)/Asset/CPN.jpg | Thread Size N/A 5/16-18 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.375 |
D (Max.) (inches) N/A .437 |
IL (Ref.) (inch) N/A .570 |
Hole Size +.006/-.000 (inches) N/A .438 |
3D CAD N/A |
CPN2-2520-500(mt.47) CPN2-2520-500(mt.47)/Asset/CPN.jpg | Thread Size N/A 1/4-20 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.234 |
D (Max.) (inches) N/A .346 |
IL (Ref.) (inch) N/A .505 |
Hole Size +.006/-.000 (inches) N/A .347 |
3D CAD N/A |
CPN2-3118-500(mt.47) CPN2-3118-500(mt.47)/Asset/CPN.jpg | Thread Size N/A 5/16-18 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.375 |
D (Max.) (inches) N/A .437 |
IL (Ref.) (inch) N/A .570 |
Hole Size +.006/-.000 (inches) N/A .438 |
3D CAD N/A |
CPN2-2520-500(mt.48) CPN2-2520-500(mt.48)/Asset/CPN.jpg | Thread Size N/A 1/4-20 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.234 |
D (Max.) (inches) N/A .346 |
IL (Ref.) (inch) N/A .505 |
Hole Size +.006/-.000 (inches) N/A .347 |
3D CAD N/A |
CPN2-3118-500(mt.48) CPN2-3118-500(mt.48)/Asset/CPN.jpg | Thread Size N/A 5/16-18 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.375 |
D (Max.) (inches) N/A .437 |
IL (Ref.) (inch) N/A .570 |
Hole Size +.006/-.000 (inches) N/A .438 |
3D CAD N/A |
CPN2-2520-500(mt.49) CPN2-2520-500(mt.49)/Asset/CPN.jpg | Thread Size N/A 1/4-20 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.234 |
D (Max.) (inches) N/A .346 |
IL (Ref.) (inch) N/A .505 |
Hole Size +.006/-.000 (inches) N/A .347 |
3D CAD N/A |
CPN2-3118-500(mt.49) CPN2-3118-500(mt.49)/Asset/CPN.jpg | Thread Size N/A 5/16-18 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.375 |
D (Max.) (inches) N/A .437 |
IL (Ref.) (inch) N/A .570 |
Hole Size +.006/-.000 (inches) N/A .438 |
3D CAD N/A |
CPN2-2520-500(mt.50) CPN2-2520-500(mt.50)/Asset/CPN.jpg | Thread Size N/A 1/4-20 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.234 |
D (Max.) (inches) N/A .346 |
IL (Ref.) (inch) N/A .505 |
Hole Size +.006/-.000 (inches) N/A .347 |
3D CAD N/A |
CPN2-3118-500(mt.50) CPN2-3118-500(mt.50)/Asset/CPN.jpg | Thread Size N/A 5/16-18 UNC |
Grip Range (Min.-Max.) N/A .280-.500 |
L ±.015 (inch) N/A 1.375 |
D (Max.) (inches) N/A .437 |
IL (Ref.) (inch) N/A .570 |
Hole Size +.006/-.000 (inches) N/A .438 |
3D CAD N/A |